Ford Fusion: Multifunction Electronic Modules / Module Controlled Functions - Overview. Description and Operation

Ford Fusion 2013–2020 Service Manual / Electrical / Electronic Feature Group / Multifunction Electronic Modules / Module Controlled Functions - Overview. Description and Operation

Body Control Module (BCM)

The BCM controls the following:

Battery saver function
Brake shift interlock
Delayed accessory function
Dimmable backlighting
Decklid release
Exterior lighting
Horn
Ignition state messaging
Push-button start function
Interior lighting
Key validation (part of the PATS)
Keyless entry keypad
PATS
Perimeter alarm
Post crash alert function
Power door locks
RKE system
Remote start
TPMS

Module Controlled Functions - Component Location. Description and Operation

Module Controlled Functions - System Operation and Component Description. Description and Operation

System Operation Battery Saver The battery saver feature is use to save battery voltage. The BCM provides automatic shut-off of the interior and exterior lamps after a time-out period when the ignition is off...

Other information:

Ford Fusion 2013–2020 Service Manual: RTV Sealing Surface Cleaning and Preparation. General Procedures

Special Tool(s) / General Equipment Plastic Scraper Nylon Bristle Disk Plastic Razor Blade Lint-Free Towel Isopropyl Alcohol – 90 Percent Minimum Materials Name Specification Motorcraft® Silicone Gasket RemoverZC-30-A - Motorcraft® Metal Surface Prep WipesZC-31-B - Motorcraft® Engine Shampoo and DegreaserZC-20 ESR-M14P3-A ..

Ford Fusion 2013–2020 Service Manual: Luggage Compartment Lid Hinge. Removal and Installation

Removal NOTE: Left hand (LH) side shown, right hand (RH) side similar. Remove the luggage compartment lid. Refer to: Luggage Compartment Lid (501-03) . Remove the parcel shelf trim. Refer to: Parcel Shelf (501-05 Interior Trim and Ornamentation, Removal and Installation). Loosen but do not remove the hinge fasteners. Re..

Understanding Your Tire Pressure Monitoring System

Ford Fusion. Understanding Your Tire Pressure Monitoring System

The tire pressure monitoring system measures pressure in your road tires and sends the tire pressure readings to your vehicle. You can view the tire pressure readings through the information display. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.