Ford Fusion Manuals

Ford Fusion: Wheels and Tires / Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

Ford Fusion 2013–2020 Owners Manual / Wheels and Tires / Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

Wheel Lug Nut Torque Specifications

WARNING: When you install a wheel, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure to secure any fasteners that attach the rotor to the hub so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while your vehicle is in motion, resulting in loss of vehicle control, personal injury or death.

Ford Fusion. Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

*Torque specifications are for nut and bolt threads free of oil, dirt and rust. Use only Ford recommended replacement fasteners.

Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).

Ford Fusion. Technical Specifications - 1.5L  EcoBoost™/2.0L EcoBoost™/2.5L

  1. Wheel pilot bore.

Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.

    Stowing the Flat Tire Using the Retainer Strap (If Equipped)

    You can temporarily stow the full-size road wheel in the spare tire compartment. Find the flat tire retainer strap tucked inside the jack channel...

    Technical Specifications - 2.7L EcoBoost™

    Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Brake Caliper Anchor Plate - 2.7L EcoBoost (238kW/324PS). Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the wheel and tire. Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation). Remove and discard the brake caliper spring...

    Ford Fusion 2013–2020 Service Manual: Coolant Pump. Removal and Installation


    Special Tool(s) / General Equipment 303-1556Locking Tool, Timing BeltTKIT-2010B-FLMTKIT-2010B-ROW 303-748Locking Tool, CrankshaftTKIT-2010B-FLMTKIT-2010B-ROW Hose Clamp Remover/Installer 4 mm Drill Bit Removal NOTE: The original coolant pump may not be equipped with a clutch and wiring harness connector...

    Categories

    Using Seatbelts During Pregnancy

    WARNING: Always ride and drive with your seatback upright and properly fasten your seatbelt. Fit the lap portion of the seatbelt snugly and low across the hips. Position the shoulder portion of the seatbelt across your chest. Pregnant women must follow this practice. See the following figure.

    Ford Fusion. Using Seatbelts During Pregnancy

    read more

    Copyright © 2022 www.fofusion2.com