Ford Fusion Manuals

Ford Fusion: Windows and Mirrors / Moonroof (IF EQUIPPED)

WARNING: Do not let children play with the moonroof or leave them unattended in the vehicle. They may seriously hurt themselves.

WARNING: When closing the moonroof, you should verify that it is free of obstructions and make sure that children and pets are not in the proximity of the roof opening.

The sliding shade can be manually opened or closed when the moonroof is closed. Pull the shade toward the front of the vehicle to close it.

The moonroof controls are located on the overhead console and have a one-touch open and close feature. To stop it during one-touch operation, touch the control a second time.

Ford Fusion. Moonroof (IF EQUIPPED)

  1. Open
  2. Vent
  3. Close

Opening and Closing the Moonroof

Touch (A) to open the moonroof. It will stop short of the fully opened position.

Note: This position helps to reduce wind noise or rumbling which may happen with the moonroof fully open. Touch (A) again to fully open the moonroof.

Touch (C) to close the moonroof.

Bounce-Back

The moonroof will stop automatically and reverse some distance if an obstacle is detected while closing.

Touch and hold (C) within two seconds of a bounce-back event to override this function.

Venting the Moonroof

Touch (B) to vent the moonroof. Touch (C) to close it.

    Interior Mirror. Sun Visors

    Interior Mirror WARNING: Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death...

    Instrument Cluster

    ..

    Other information:

    Ford Fusion 2013–2020 Service Manual: Rear Lamp Assembly - 4-Door. Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the luggace net nut and position the luggage compartment interior trim aside. Remove the nuts. Torque: 28 lb.in (3.2 Nm) Position the rear lamp assembly. Disconnect the electrical connector and remove the rear..

    Ford Fusion 2013–2020 Service Manual: Side Panel Extension. Removal and Installation


    Special Tool(s) / General Equipment Resistance Spotwelding Equipment Hot Air Gun Knife MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B -  Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal NOTICE: Battery ..

    Categories

    Cross Traffic Alert System Sensors

    Ford Fusion. Cross Traffic Alert System Sensors

    The sensors are behind the rear bumper on both sides of your vehicle.

    read more

    Copyright © 2024 www.fofusion2.com