Ford Fusion Manuals

Ford Fusion: Cruise Control / What Is Cruise Control. Switching Cruise Control On and Off. Setting the Cruise Control Speed

Ford Fusion 2013–2020 Owners Manual / Cruise Control / What Is Cruise Control. Switching Cruise Control On and Off. Setting the Cruise Control Speed

What Is Cruise Control

Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. You can use cruise control when your vehicle speed is greater than 20 mph (30 km/h).

Switching Cruise Control On and Off

WARNING: Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.

The cruise controls are on the steering wheel.

Switching Cruise Control On

Ford Fusion. What Is Cruise Control. Switching Cruise Control On and Off. Setting the Cruise Control Speed Press the button.

Switching Cruise Control Off

Ford Fusion. What Is Cruise Control. Switching Cruise Control On and Off. Setting the Cruise Control Speed Press the button when the system is in standby mode.

The system also turns off when you switch the ignition off.

Note: The set speed erases when you switch the system off.

Setting the Cruise Control Speed

WARNING: When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes.

Drive to the speed you prefer.

Ford Fusion. What Is Cruise Control. Switching Cruise Control On and Off. Setting the Cruise Control Speed Press either button to set the current speed.

Take your foot off the accelerator pedal.

Note: The indicator changes color in the information display.

Changing the Set Speed

Ford Fusion. What Is Cruise Control. Switching Cruise Control On and Off. Setting the Cruise Control Speed Press and release the button to increase the set speed in small increments.

Press and hold the button to accelerate. Release the button when you reach your preferred speed.

Ford Fusion. What Is Cruise Control. Switching Cruise Control On and Off. Setting the Cruise Control Speed Press and release the button to decrease the set speed in small increments.

Press and hold the button to decelerate. Release the button when you reach your preferred speed.

Note: If you accelerate by pressing the accelerator pedal, the set speed does not change. When you release the accelerator pedal, your vehicle returns to the speed that you previously set.

    Cruise Control

    ..

    Canceling the Set Speed. Resuming the Set Speed. Cruise Control Indicators.

    Canceling the Set Speed Press the button, or tap the brake pedal to cancel the set speed. Note: The system remembers the set speed. Note: The system cancels if the vehicle speed drops below 10 mph (16 km/h) under the set speed when driving uphill...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Frame Assembly - Overview. Description and Operation


    Overview The front subframe is bolted to the body and is used to: aid in structural support. provide mounting surfaces for the steering gear. provide mounting surfaces for the front suspension lower control arms, the transmission roll restrictor and for the front stabilizer bar...

    Ford Fusion 2013–2020 Service Manual: SYNC Module [APIM] to Front Display Interface Module (FDIM) Cable. Removal and Installation


    Removal Remove the FDIM. Refer to: Front Display Interface Module (FDIM) (415-00 Information and Entertainment System - General Information - Vehicles With: SYNC 3, Removal and Installation). Disconnect the electrical connectors and remove the APIM to FDIM cable...

    Categories

    Understanding Your Tire Pressure Monitoring System

    Ford Fusion. Understanding Your Tire Pressure Monitoring System

    The tire pressure monitoring system measures pressure in your road tires and sends the tire pressure readings to your vehicle. You can view the tire pressure readings through the information display. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.

    read more

    Copyright © 2022 www.fofusion2.com