Ford Fusion Manuals

Ford Fusion: Maintenance / General Information

Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle.

If your vehicle requires professional service, an authorized dealer can provide the necessary parts and service. Check your warranty information to find out which parts and services are covered.

Use only recommended fuels, lubricants, fluids and service parts conforming to specifications. Motorcraft® parts are designed and built to provide the best performance in your vehicle.

Precautions

  • Do not work on a hot engine.
  • Make sure that nothing gets caught in moving parts.
  • Do not work on a vehicle with the engine running in an enclosed space, unless you are sure you have enough ventilation.
  • Keep all open flames and other burning material (such as cigarettes) away from the battery and all fuel related parts.

Working with the Engine Off

  1. Set the parking brake and shift the transmission to park (P).
  2. Switch off the engine.
  3. Block the wheels.

Working with the Engine On

WARNING: To reduce the risk of vehicle damage and personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running.

  1. Set the parking brake and shift the transmission to park (P).
  2. Block the wheels.

    Maintenance

    ..

    Opening and Closing the Hood

    Opening the Hood Inside the vehicle, pull the hood release handle located under the left-hand side of the instrument panel. Slightly lift the hood...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Starting System - System Operation and Component Description. Description and Operation


    System Operation System Diagram Network Message Chart   Module Network Input Messages Powertrain Control Module (PCM) Broadcast Message Originating Module Message Purpose Ignition status   BCM Provides the PCM with ignition mode...

    Ford Fusion 2013–2020 Service Manual: Rear Door Check Arm. Removal and Installation


    Removal NOTE: Left hand (LH) side shown, right hand (RH) side similar. Remove the door trim panel and water shield. Refer to: Rear Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). Remove the rear door...

    Categories

    Child Safety Locks

    When these locks are set, the rear doors cannot be opened from the inside.

    Ford Fusion. Child Safety Locks

    read more

    Copyright © 2024 www.fofusion2.com