Ford Fusion: General Information / Engine Cooling System Health and Safety Precautions. Description and Operation
WARNING:
Always allow the engine to cool before opening the cooling
system. Do not unscrew the coolant pressure relief cap when the engine
is operating or the cooling system is hot. The cooling system is under
pressure; steam and hot liquid can come out forcefully when the cap is
loosened slightly. Failure to follow these instructions may result in
serious personal injury.
WARNING:
Do not use any fluid other than clean brake fluid meeting
manufacturer's specification. Additionally, do not use brake fluid that
has been previously drained...
WARNING:
Service and handling of Pyrotechnic Components is restricted to
qualified personnel. The required qualifications vary by region. Always
observe local laws and legislative directives regarding Pyrotechnic
Components service and handling...
Other information:
Programming
NOTE:
This procedure works only if the spare key programming is enabled.
NOTE:
Two previously programmed keys are required to perform this
procedure. All the steps must be completed within 30 seconds.
NOTE:
Make sure all the doors are closed prior to beginning this
procedure and they remain closed until the procedure is complete...
Removal
NOTICE:
During the removal or installation of components, cap, tape
or otherwise appropriately protect all openings and tubes/fittings to
prevent the ingress of dirt or other contamination. Remove caps, tape
and other protective materials prior to installation...