Ford Fusion Manuals

Ford Fusion: Vehicle Care / Cleaning Leather Seats (IF EQUIPPED)

Ford Fusion 2013–2020 Owners Manual / Vehicle Care / Cleaning Leather Seats (IF EQUIPPED)

Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces.

For routine cleaning, wipe the surface with a soft, damp cloth and a mild soap and water solution. Dry the area with a clean, soft cloth.

For cleaning and removing stains such as dye transfer, use Motorcraft Premium Leather and Vinyl Cleaner or a commercially available leather cleaning product for automotive interiors.

Note: Test any cleaner or stain remover on an inconspicuous area.

You should:

  • Remove dust and loose dirt with a vacuum cleaner.
  • Clean and treat spills and stains as soon as possible.

Do not use the following products as these may damage the leather:

  • Oil and petroleum or silicone-based leather conditioners.
  • Household cleaners.
  • Alcohol solutions.
  • Solvents or cleaners intended specifically for rubber, vinyl and plastics.

    Cleaning the Instrument Panel and Instrument Cluster Lens

    WARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system...

    Repairing Minor Paint Damage. Cleaning the Wheels

    Repairing Minor Paint Damage Authorized dealers have touch-up paint to match your vehicle’s color. Your vehicle color code is printed on a sticker on the front, left-hand side door jamb...

    Other information:

    Ford Fusion 2013–2020 Service Manual: Module Configuration - System Operation and Component Description. Description and Operation


    System Operation Module Programming Menu Module Programming is listed under the Toolbox tab after starting an IDS session with a vehicle. The module programming menu is disabled when a manual vehicle session is created. The Module Programming menu has 4 selections: Programmable Module Installation (PMI) Module Reprogramming Programmable Parameters As-Built These selec..

    Ford Fusion 2013–2020 Service Manual: Rear Lamp Mounting Panel. Removal and Installation


    Special Tool(s) / General Equipment Hot Air Gun 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal   WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Fail..

    Categories

    Manual Climate Control

    Ford Fusion. Manual Climate Control

    Note: Depending on your vehicle option package, the controls may look different from what you see here.

    read more

    Copyright © 2026 www.fofusion2.com